Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
6-20 Working with Removable Drives
Writer: Betty Fessenden - Saved by: BLF - Saved date: 6/17/96
Part Number: 213660-001 - File name: CH6
5. Close the loading tray by pushing on the front panel of the tray.
The drive performs a diagnostic check and automatically begins
reading the Table of Contents (TOC). The light on the front of
the drive turns on while the TOC is being read.
6. When the light on the drive turns off, the drive is ready to
receive commands.
Removing a CD from the CD-ROM Drive
1. Open the CD loading tray by pressing the release button on the
front panel of the drive.
2. Slowly pull the loading tray out from the drive until it is fully
extended.
3. Remove the CD from the tray. Handle the CD by the edges, not
by the flat surfaces.
4. Place the CD into its protective case.
5. Close the loading tray by pushing on the front panel of the tray.