Compaq LTE 5000 Laptop User Manual


 
. . . . . . . . . . . . . . . . . . . . . . . . .
Working with Removable Drives 6-27
Writer: Betty Fessenden - Saved by: BLF - Saved date: 6/17/96
Part Number: 213660-001 - File name: CH6
Hard drives that have secondary-drive capability have the
following symbol on the label located on top of the drive:
If you have LTE Elite hard drives that do not have secondary-drive
capability, you can use them in the LTE 5000 computer with the
limitations described later in this section.
Using LTE Elite Hard Drives That
Have Secondary-Drive Capability
You can use LTE Elite hard drives that have secondary-drive
capability the same way you would use additional LTE 5000 hard
drives. Follow the steps described earlier in this chapter to insert up
to three in the computer and expansion base MultiBays. Start (boot)
the computer from the original LTE 5000 hard drive in the
dedicated hard drive bay.
Using LTE Elite Hard Drives That Do
Not Have Secondary-Drive Capability
LTE Elite hard drives that do not have the secondary-drive
capability symbol must be used in the primary drive bay in the
computer or MultiBay I in the expansion base.
Before beginning one of the procedures to insert the drive, run
Computer Setup and ensure that the hard drive boot sequence on
the Initialization menu is set to the factory default of:
1. Hard drive in the computer
2. Hard drive in the computer MultiBay
3. Hard drive in the expansion base MultiBay I
4. Hard drive in the expansion base MultiBay II
Refer to Chapter 10, "Running Computer Setup," for information
about setting up your computer.