Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . .
6-30 Working with Removable Drives
Writer: Betty Fessenden - Saved by: BLF - Saved date: 6/17/96
Part Number: 213660-001 - File name: CH6
The factory default hard drive boot sequence is:
1. Hard drive in the computer
2. Hard drive in the computer MultiBay
3. Hard drive in the expansion base MultiBay I
4. Hard drive in the expansion base MultiBay II
If you want to change the hard drive boot sequence, follow the
instructions in Chapter 10 to run Computer Setup, select the
Initialization menu, then select Hard Drive Boot Sequence. Follow
the instructions on the status bar (at the bottom of the screen) to
change the sequence.
If you add an optional bootable hard drive and change the boot
sequence, you must also change the logical drive designations. For
example, with the default hard drive boot sequence, the computer
hard drive is drive C and a hard drive in the expansion base is
drive D. If you boot from the hard drive in the expansion base, it
becomes drive C and the computer hard drive becomes drive D.