Filter
Top Products
Using the Remote Control 42
Part Number: 216023-001 - Writer: Carey Gregg - Saved by: Carey Gregg
Pages: 5 Words: 498 Saved date: 09/22/0010:14 AM File Name: Ch04.doc
Remote Control Functions
The remote control performs the following functions:
n Duplicates the functions of the projector buttons including
adjusting the on-screen buttons.
n Controls the computer connected to the projector by navigating
through the computer directories and opening and closing files.
IMPORTANT: To operate a computer using the remote control,
the remote control Y-cable (included with the Multimedia Adapter)
must be used. Connect the 8-pin connector cable to the appropriate
connector on the Multimedia Adapter and connect the USB
connector to the USB connector on the computer (preferred) or the
RS232 connector to the serial connector on the computer. Do not
connect both the USB and RS232 connectors to the computer.
NOTE: The remote control Page Up and Page Down functions
require an additional driver when used with the RS232 connector.
This driver can be found on the CD-ROM that came with your
projector.