Compaq N1000 Laptop User Manual


 
5–36 Maintenance and Service Guide
Removal and Replacement Procedures
8. Lift the front edge of the palm rest and swing it up and
back
1
until it rests on the top cover (Figure 5-28).
9. Release the ZIF connector to which the diskette drive cable
is attached
2
and disconnect the diskette drive cable
3
from
the system board.
10. Release the ZIF connector to which the system board-
to-TouchButton board cable is attached
4
and disconnect
the cable
5
from the TouchButton board.
Figure 5-28. Removing the Palm Rest
279372-001.book Page 36 Friday, July 19, 2002 11:50 AM