Filter
Top Products
5–10 Maintenance and Service Guide
Removal and Replacement Procedures
5.8 EMI Shield
The EMI shield is included in the Miscellaneous Hardware Kit
(spare part number 239052-001).
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. Hinge covers (Section 5.5)
b. Keyboard (Section 5.6)
c. Display (Section 5.7)
2. Remove the black M2 × 12.5 screw
that secures the EMI
shield to the base enclosure (Figure 5-7).
3. Lift the back edge of the EMI shield up and swing it
forward
, then slide the EMI shield toward the back of the
computer at a 45-degree angle
.
4. Remove the EMI shield.
Figure 5-7. Removing the EMI Shield
Reverse the above procedure to install the EMI shield.