Compaq N150 Laptop User Manual


 
Removal and Replacement Procedures
Maintenance and Service Guide 5–25
2. Disconnect the fan cable from the system board
(Figure 5-17).
3. Remove the modem cable from the clip in the heat sink
.
4. Remove the four black M2 × 4.0 screws
and the pewter
M2.5 × 7.0 screw
that secure the heat sink to the base
enclosure.
5. Remove the heat sink.
Figure 5-17. Removing the Heat Sink
The fan and heat sink are spared as one assembly. Do not remove
the fan from the heat sink.
Reverse the above procedure to install the heat sink.