Filter
Top Products
Page 52
Setup WAN for ADSL Internet using PPTP
If you subscribe to an ADSL service using Point-to-Point Tunneling Protocol (PPTP)
authentication, you can set up your router’s WAN type from the steps that follow.
For example, if the ISP provided you with the following set up information, you can
set up your WAN as described below:
IP Address : 203.120.12.47
Network Mask : 255.255.255.0
VPN Server : 203.120.12.15
1. Under the CONFIGURATION on the command menu, click on WAN Setup.
2. Access the Select WAN Type
page and choose PPTP before
clicking the Apply button. You
will then be brought to the
following page requiring your
inputs.
3. Fill in the information, followed by
clicking the Apply button.
• Select whether to enable DHCP.
• Enter in the client IP Address.
• Enter in the Network Mask.
• Enter in the Gateway.
• Enter in the Username of your
Internet account.
• Enter in the Password of your
Internet account.
• Enter the IP address of your VPN
Server.
• Enter an Idle Timeout value
between 30-3600 seconds.
Entering 0 will disable this feature.
The Idle Timeout setting allows you to
specify the value (in seconds) after
which the router will disconnect from
the ISP after the last Internet activity. A
value of “0” will disable idle timeout.