Datacard Group RP90 All in One Printer User Manual


 
Status Monitor
26 RP90 Plus E and RL90 User Guide
If you choose Keep Blocking and decide that you want the Status Monitor to run,
you must uninstall the Status Monitor, restart Windows Vista, and install it again.
3 To start the Status Monitor without Administrator permissions, click the icon to open
it. A prompt appears to tell you that you cannot change settings. Click
OK to
continue.
4 The Status Monitor window opens.
Close the Status Monitor
To close the Status Monitor:
1 Click the red Close button.
2 A prompt asking if you want to close the Status Monitor appears. Click
Yes.
Tips for Success
When you close the Status Monitor, communication between the printer and driver
becomes one way, with the driver sending cards to the printer.
To keep the Status Monitor running without viewing it, click the
Minimize button.
Printer Status tab
The Status tab shows:
The type of ink ribbon, the approximate
percentage remaining, and the lot number.
The type of retransfer (INTM) supply and the
approximate percentage remaining.
The resettable print count and a Clear button
to set it to zero (0).
The printer name. If more than one printer is
installed, choose the printer to work with using
the
Printer Name list. Click the Update button
to search for additional RP90 Plus E printers.
The information changes automatically when
you choose another printer.
An estimate of the cards remaining in the card
hopper.
Less means:
25 or fewer 0.76mm (0.030in) cards
70 or fewer 0.25mm (0.010in) cards
When the printer requires cleaning, the printer image changes to: