Datacard Group RP90 All in One Printer User Manual


 
Printer error recovery
RP90 Plus E and RL90 User Guide 53
Turnover jam
If a card jams in the card turnover section, “Jam (Turnover)” is displayed on
the LCD panel. To remove the jammed card:
1 Slide the door latch to the right and open the printer door.
2 Press the ink ribbon cartridge eject button and remove the ink ribbon
cartridge.
3 Remove the jammed card.
If you can reach the jammed card, pull it out.
— If the jammed card is sticking out of the turnover table, push it back
into the table, and rotate the table slowly until the card can be
removed.
4 Replace the ink ribbon cartridge and initialize the ink ribbon as
described in
“Initialize the ink ribbon” on page 16.
Tips – Turnover jam
Some internal parts may
be hot. Wear a glove
when rotating the
turnover table.