Filter
Top Products
Back to Contents Page
System Board
Dell™Vostro™1014/1015ServiceManual
Vostro 1014
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the ExpressCard.
3. Remove the memory card.
4. Remove the battery.
5. Remove the access panel.
6. Remove the hard drive.
7. Remove the memory modules.
8. Remove the WLAN card.
9. Remove the control panel cover.
10. Remove the keyboard.
11. Remove the display assembly.
12. Remove the palm rest.
13. Remove the processor fan.
14. Remove the I/O board.
15. Remove the Bluetooth wireless card.
16. Disconnect the speaker cables from the system board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Vostro 1014
Vostro 1015