Filter
Top Products
Back to Contents Page
Processor Module
Dell™Vostro™1014/1015ServiceManual
Removing the Processor Module
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the ExpressCard.
3. Remove the memory card (if applicable).
4. Remove the battery.
5. Remove the access panel.
6. Remove the hard drive.
7. Remove the memory modules.
8. Remove the WLAN card.
9. Remove the control panel cover.
10. Remove the keyboard.
11. Remove the display assembly.
12. Remove the palm rest.
13. Remove the processor fan.
14. Remove the I/O board.
15. Remove the Bluetooth wireless card.
16. Remove the system board.
17. Remove the heat sink.
18. Set aside the computer chassis and place the system board on a clean, dry surface.
19. Use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.