Filter
Top Products
Back to Contents Page
I/O Board
Dell™Vostro™1014/1015ServiceManual
Removing the I/O Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Remove the access panel.
4. Remove the hard drive.
5. Remove the WLAN card.
6. Remove the control panel cover.
7. Remove the keyboard.
8. Remove the display assembly.
9. Remove the palm rest.
10. Remove the two screws that secure the I/O board to the computer chassis.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.