Filter
Top Products
32.yy Cartridge part number unsupported by device
Remove the toner cartridge, and then install a supported one.
34 Short paper
Try one or more of the following:
• Load the appropriate paper in the tray.
• Press the up or down arrow button until Continue appears, and then press to clear the message and print
the job using a different paper tray.
• Check tray length and width guides and make sure the paper is properly loaded in the tray.
• For Windows users, check the Print Properties settings to make sure the print job is requesting the correct paper
size and type.
For Macintosh users, check the Print dialog settings to make sure the print job is requesting the correct paper
size and type.
• Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the
paper is large enough for the data being printed.
• Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.
35 Insufficient memory to support Resource Save feature
Try one or more of the following:
• Press the up or down arrow button until Continue appears, and then press to disable Resource Save and
continue printing.
• To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit
the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
• Install additional memory.
37 Insufficient memory to collate job
Try one or more of the following:
• Press the up or down arrow button until Continue appears, and then press to print the portion of the job
already stored and begin collating the rest of the print job.
• Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.
37 Insufficient memory for Flash Memory Defragment operation
Try one or more of the following:
• Press the up or down arrow button until Continue appears, and then press to stop the defragment process
and continue printing.
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
Troubleshooting
163