Filter
Top Products
Installing System Components 49
Figure 3-5. Removing or Installing a Diskette Drive
Optical or Tape Drives
An optical drive is standard in the first external drive bay. An additional IDE or SCSI tape drive can be
installed in the second external drive bay. These drives connect either to the system board or to an
optional controller card.
NOTE: Installing an additional optical drive in the second external drive bay is not supported.
1 diskette (3.5-inch) drive 2 externally accessible drive
bay
3screws (2)
4 interface cable 5 power cable
1
2
5
4
3