Dell 8500 Laptop User Manual


 
Back to Contents Page
Microprocessor Thermal-Cooling Assembly
Dell™Inspiron™8500/8600ServiceManual
Removing the Microprocessor Thermal-Cooling Assembly
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the fan.
4. Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the microprocessor thermal-cooling assembly to the system
board.
5. Rotate the microprocessor thermal-cooling assembly up toward the side of the computer and away from the system board.
CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
1
captive screws (4)
2
microprocessor thermal-
cooling assembly