Dell E6510 Laptop User Manual


 
Back to Contents Page
PCMCIA Card Cage
Dell™Latitude™E6510ServiceManual
Removing the PCMCIA Card Cage
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery
3. Remove the PCMCIA card.
4. Remove the access panel.
5. Remove the hinge covers.
6. Remove the LED cover.
7. Remove the keyboard.
8. Remove the hard drive.
9. Remove the finger print reader.
10. Remove the heat sink and fan assembly.
11. Remove the display assembly.
12. Remove the palm rest assembly.
13. Remove the screws that secure the PCMCIA card cage to the chassis.
14. Press down the PCMCIA card cage and lift it by the edge to release the PCMCIA card cage from the securing tabs.
15. Remove the PCMCIA card cage from the computer.
Replacing the PCMCIA Card Cage
To replace the PCMCIA card cage, perform the above steps in reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: YoumayneedtoinstallAdobe™FlashPlayer™fromAdobe.com in order to view the illustrations below.