Dell FCX624-E Laptop User Manual


  Open as PDF
of 1494
 
PowerConnect B-Series FCX Configuration Guide 1187
53-1002266-01
Configuring RADIUS security
32
Enabling SNMP to configure RADIUS
To enable SNMP access to RADIUS MIB objects on the device, enter a command such as the
following.
PowerConnect(config)#enable snmp config-radius
foundry-access-list 5 string Specifies the access control list to be used for
RADIUS authorization. Enter the access control
list in the following format.
type=string, value="ipacl.[e|s].[in|out] =
[<acl-name>|<acl-number>] <separator>
macfilter.in = [<acl-name>|<acl-number>]
Where:
separator can be a space, newline,
semicolon, comma, or null characater
ipacl.e is an extended ACL; ipacl.s is a
standard ACL.
foundry-MAC-authent-needs-80
2x
6 integer Specifies whether or not 802.1x authentication is
required and enabled.
0 - Disabled
1 - Enabled
foundry-802.1x-valid-lookup 7 integer Specifies if 802.1x lookup is enabled:
0 - Disabled
1 - Enabled
foundry-MAC-based-VLAN-QOS 8 integer Specifies the priority for MAC-based VLAN QOS:
0 - qos_priority_0
1 - qos_priority_1
2 - qos_priority_2
3 - qos_priority_3
4 - qos_priority_4
5 - qos_priority_5
6 - qos_priority_6
7 - qos_priority_7
foundry-INM-Role-AOR-List 9 string Specifies the list of Roles and Area of
Responsibility (AOR) that are allowed for an
IronView Network Manager
user. These values
are mapped to IronView Network Manager Roles
and AORs when the user logs in.
For example, to configure an IronView Network
Manager
user to have “Administrator”
and”'Report User” roles and “New York Region”
and “Santa Clara Region” AORs, specify
“'InmRoles=Administrator, Report User;
InmAORs=New York Region, Santa Clara Region”.
The keys “InmRoles” and “InmAORs” are
delimited by semi colon (;) and the values for the
keys are delimited by a comma (,).
Refer to the IronView Network Manager User
Guide for details.
TABLE 204 Dell vendor-specific attributes for RADIUS (Continued)
Attribute name Attribute ID Data type Description