Filter
Top Products
PowerConnect B-Series FCX Configuration Guide 1297
53-1002266-01
Displaying multi-device port authentication information
36
Port Default Vlan The VLAN to which the port is assigned, and whether the port had been
dynamically assigned to the VLAN by a RADIUS server.
Port VLAN state Indicates the state of the port VLAN. The State can be one of the following
“Default”, “RADIUS Assigned” or “Restricted”.
802.1X override Dynamic PVID Indicates if 802.1X can dynamically assign a Port VLAN ID (PVID).
override return to PVID If a port PVID is assigned through the multi-device port authentication feature,
and 802.1X authentication subsequently specifies a different PVID, then the
PVID specified through 802.1X authentication overrides the PVID specified
through multi-device port authentication. This line indicates the PVID the port
will use if 802.1X dynamically assigns PVID.
Original PVID The originally configured (not dynamically assigned) PVID for the port.
DOS attack protection Whether denial of service attack protection has been enabled for multi-device
port authentication, limiting the rate of authentication attempts sent to the
RADIUS server.
Accepted Mac Addresses The number of MAC addresses that have been successfully authenticated.
Rejected Mac Addresses The number of MAC addresses for which authentication has failed.
Authentication in progress The number of MAC addresses for which authentication is pending.
This is the number of MAC addresses for which an Access-Request message has
been sent to the RADIUS server, and for which the RADIUS server has not yet
sent an Access-Accept message.
Authentication attempts The total number of authentication attempts made for MAC addresses on an
interface, including pending authentication attempts.
RADIUS timeouts The number of times the session between the Dell PowerConnect device and
the RADIUS server timed out.
RADIUS timeout action Action to be taken by the RADIUS server if it times out.
MAC address on the PVID Number of MAC addresses on the PVID.
MAC address authorized on
PVID
Number of authorized MAC addresses on the PVID.
Aging of MAC-sessions Whether software aging of MAC addresses is enabled.
Port move-back VLAN Indicates the destination VLAN when a RADIUS assigned VLAN is removed. By
default, it would return the configured VLAN.
Max-Age of sw MAC-sessions The configured software aging period for MAC addresses.
hw age for denied MAC The hardware aging period for blocked MAC addresses. The MAC addresses are
dropped in hardware ones the aging period expires.
MAC Filter applied Indicates whether a MAC address filter has been applied to this port to specify
pre-authenticated MAC addresses.
Dynamic ACL applied Indicates whether a dynamic ACL was applied to this port.
num Dynamic Tagged Vlan The number of dynamically tagged VLANs on this port.
Dynamic Tagged Vlan list The list of dynamically tagged VLANs on this port. In this example, 1025 (1/1)
indicates that there was one MAC session and one learned MAC address for
VLAN 1025. Likewise, 4060 (1/0) indicates that there was one MAC session
and no learned MAC addresses for VLAN 4060.
TABLE 230 Output from the show auth-mac-addresses detailed command (Continued)
This field... Displays...