Filter
Top Products
1398 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Syslog messages
41
Informational ERR_DISABLE: Interface ethernet 16,
err-disable recovery timeout
If the wait time (port is down and is waiting
to come up) expires and the port is brought
up the following message is displayed.
Informational ERR_DISABLE: Link flaps on port ethernet 16
exceeded threshold; port in err-disable state
The threshold for the number of times that
a port link toggles from “up” to “down” and
“down” to “up” has been exceeded.
Informational Interface <portnum>, line protocol down The line protocol on a port has gone down.
The <portnum> is the port number.
Informational Interface <portnum>, line protocol up The line protocol on a port has come up.
The <portnum> is the port number.
Informational Interface <portnum>, state down A port has gone down.
The <portnum> is the port number.
Informational Interface <portnum>, state up A port has come up.
The <portnum> is the port number.
Informational MAC Based Vlan Disabled on port <port id> A MAC Based VLAN has been disabled on a
port
Informational MAC Based Vlan Enabled on port <port id> A MAC Based VLAN has been enabled on a
port.
Informational MAC Filter added | deleted | modified from
console | telnet | ssh | web | snmp session
filter id = <MAC filter ID>, src mac = <Source
MAC address> | any, dst mac = <Destination
MAC address> | any
A user created, modified, deleted, or
applied this MAC address filter through the
Web, SNMP, console, SSH, or Telnet
session.
Informational MSTP: BPDU-guard interface ethernet
<port-number> detect (Received BPDU),
putting into err-disable state.
BPDU guard violation occurred in MSTP.
Informational OPTICAL MONITORING: port <port-number>
is not capable.
The optical transceiver is qualified by Dell
PowerConnect, but the transceiver does not
support digital optical performance
monitoring.
Informational Port <p> priority changed to <n> A port priority has changed.
Informational Port <portnum>, srcip-security
max-ipaddr-per-int reached.Last
IP=<ipaddr>
The address limit specified by the
srcip-security max-ipaddr-per-interface
command has been reached for the port.
Informational Port <portnum>, srcip-security
max-ipaddr-per-int reached.Last
IP=<ipaddr>
The address limit specified by the
srcip-security max-ipaddr-per-interface
command has been reached for the port.
Informational Security: console login by <username> to
USER | PRIVILEGE EXEC mode
The specified user logged into the device
console into the specified EXEC mode.
Informational Security: console logout by <username> The specified user logged out of the device
console.
Informational Security: telnet | SSH login by <username>
from src IP <ip-address>
, src MAC
<mac-address> to USER | PRIVILEGE EXEC
mode
The specified user logged into the device
using Telnet or SSH from either or both the
specified IP address and MAC address. The
user logged into the specified EXEC mode.
TABLE 239 Syslog messages (Continued)
Message level Message Explanation