Filter
Top Products
504 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying VLAN information
13
• For untagged ports, the PVID is the VLAN ID number.
• For dual-mode ports, the PVID is the dual-mode VLAN ID number.
• For tagged ports without dual-mode, the PVID is always Not Applicable (NA).
Syntax: show interfaces brief [ethernet [<slotnum>/]<portnum> [to [<slotnum>/]<portnum>
[ethernet [<slotnum>/]<portnum>...]]]
The <slotnum> parameter is required on chassis devices.
Displaying PVLAN information
To display the PVLAN configuration with respect to the primary VLAN and its associated secondary
VLANs and to display the member ports, promiscous ports, and the switch-switch link ports of a
PVLAN, enter a command such as the following.
Syntax: show pvlan <vid>
The <vid> variable specifies the VLAN ID of the PVLAN. If the VLAN ID is not specified, the
command displays the default VLAN ID.
PowerConnect# show interfaces brief
Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name
1 Up Forward Full 1G None No 1 0 0012.f2a8.4700 a12345678901
2 Up Forward Full 1G None Yes 1 0 0012.f2a8.4701
3 Up Forward Full 1G None Yes NA 0 0012.f2a8.4702
4 Up Forward Full 1G None Yes NA 0 0012.f2a8.4703
5 Up Forward Full 1G None No 2 0 0012.f2a8.4704
6 Down None None None None Yes NA 0 0012.f2a8.4705
7 Down None None None None Yes 4 0 0012.f2a8.4706
8 Down None None None None Yes 4 0 0012.f2a8.4707
9 Down None None None None Yes NA 0 0012.f2a8.4708
10 Down None None None None Yes NA 0 0012.f2a8.4709
PowerConnect# show pvlan
PVLAN: primary VLAN 100
Port 1/1/4 1/1/10 1/1/11
Community VLAN 102
Port 1/1/1 1/1/2 1/1/10 1/1/11
Promiscuous Port: 1/1/4
Inter switch link Port: 1/1/10 1/1/11
BpduGuard enabled Port: 1/1/1 1/1/2
Isolate VLAN 101
Port 1/1/3 1/1/10 1/1/11
Promiscuous Port: 1/1/4
Inter switch link Port: 1/1/10 1/1/11
BpduGuard enabled Port: 1/1/1 1/1/2