Dell FCX624-E Laptop User Manual


  Open as PDF
of 1494
 
PowerConnect B-Series FCX Configuration Guide 25
53-1002266-01
Configuring basic system parameters
2
Syntax: show sntp status
The following table describes the information displayed by the show sntp status command.
Setting the system clock
In addition to SNTP support, Dell PowerConnect switches and routers also allow you to set the
system time counter. The time counter setting is not retained across power cycles and is not
automatically synchronized with an SNTP server. The counter merely starts the system time and
date clock with the time and date you specify.
NOTE
You can synchronize the time counter with your SNTP server time by entering the sntp sync
command from the Privileged EXEC level of the CLI.
NOTE
Unless you identify an SNTP server for the system time and date, you will need to re-enter the time
and date following each reboot.
For more details about SNTP, refer to “Specifying a Simple Network Time Protocol (SNTP) server” on
page 23.
To set the system time and date to 10:15:05 on October 15, 2003, enter the following command.
PowerConnect# clock set 10:15:05 10-15-2003
Syntax: [no] clock set <hh:mm:ss> <mm-dd-yy> | <mm-dd-yyyy>
TABLE 8 Output from the show sntp status command
This field... Indicates...
unsynchronized System is not synchronized to an NTP peer.
synchronized System is synchronized to an NTP peer.
stratum NTP stratum level of this system
reference clock IP Address of the peer (if any) to which the unit is synchronized
precision Precision of this system's clock (in Hz)
reference time Reference time stamp
clock offset Offset of clock to synchronized peer
root delay Total delay along the path to the root clock
root dispersion Dispersion of the root path
peer dispersion Dispersion of the synchronized peer
sntp poll-interval Shows how often the
Dell PowerConnect device polls for clock
updates from an SNTP server.
PowerConnect# show sntp status
Clock is synchronized, stratum = 4, reference clock = 10.70.20.23
precision is 2**-20
reference time is 3489354594.3780510747
clock offset is 0.0000 msec, root delay is 0.41 msec
root dispersion is 0.11 msec, peer dispersion is 0.00 msec
sntp poll-interval is 10 secs