Dell FCX624-E Laptop User Manual


  Open as PDF
of 1494
 
28 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Configuring basic system parameters
2
The <num> variable specifies the maximum number of packets per second. It can be any number
that is a multiple of 65536, up to a maximum value of 2147418112. If you enter the multicast limit
command, multicast packets are included in the corresponding limit. If you specify 0, limiting is
disabled. If you specify a number that is not a multiple of 65536, the software rounds the number
to the next multiple of 65536. Limiting is disabled by default.
Viewing broadcast, multicast, and unknown unicast limits
You can use the show run interface command to display the broadcast, multicast, and
unknown-unicast limits configured on the device.
You can use the following commands, in addition to the show run interface command, to display
the broadcast, multicast, and unknown-unicast limits configured on the device:
show rate-limit unknown-unicast
show rate-limit broadcast
Use the show run interface command to view the broadcast, multicast, and unknown-unicast limit
configured on each port.
Example
Syntax: show run interface
Use the show rate-limit unknown-unicast command to display the unknown unicast limit for each
port region to which it applies.
Example
PowerConnect# show run interface
interface ethernet 4
broadcast limit 1245184 bytes
multicast limit
!
interface ethernet 5
broadcast limit 1245184 bytes
multicast limit
!
interface ethernet 12
unknown-unicast limit 524288
!
interface ethernet 13
unknown-unicast limit 65536 bytes
!
interface ethernet 14
broadcast limit 65536
!
interface ethernet 23
broadcast limit 131072
multicast limit
!
PowerConnect# show rate-limit unknown-unicast
Unknown Unicast Limit Settings:
Port Region Combined Limit Packets/Bytes
1 - 12 524288 Packets
13 - 24 65536 Bytes