Filter
Top Products
676 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Using FDP
23
To display detailed information, enter the following command.
The show fdp neighbor detail command displays the following information.
Displaying FDP entries
To display the detailed neighbor information for a specific device, enter a command such as the
following.
Capability The role the neighbor is capable of playing in the network.
Platform The product platform of the neighbor.
Port ID The interface through which the neighbor sent the update.
TABLE 119 Detailed FDP and CDP neighbor information
This line... Displays...
Device ID The hostname of the neighbor. In addition, this line lists the VLAN
memberships and other VLAN information for the neighbor port that
sent the update to this device.
Entry address(es) The Layer 3 protocol addresses configured on the neighbor port that
sent the update to this device. If the neighbor is a Layer 2 Switch, this
field lists the management IP address.
Platform The product platform of the neighbor.
Capabilities The role the neighbor is capable of playing in the network.
Interface The interface on which this device received an FDP or CDP update for
the neighbor.
Port ID The interface through which the neighbor sent the update.
Holdtime The maximum number of seconds this device can keep the information
received in the update before discarding it.
Version The software version running on the neighbor.
TABLE 118 Summary FDP and CDP neighbor information (Continued)
This line... Displays...
PowerConnectA# show fdp neighbor detail
Device ID: PowerConnect B configured as default VLAN1, tag-type8100
Entry address(es):
IP address: 192.168.0.13
IPv6 address (Global): c:a:f:e:c:a:f:e
Platform: PowerConnect Router, Capabilities: Router
Interface: Eth 2/9
Port ID (outgoing port): Eth 2/9 is TAGGED in following VLAN(s):
9 10 11
Holdtime : 176 seconds
Version :
Foundry, Inc. Router, IronWare Version 07.6.01b1T53 Compiled on Aug 29
2002 at 10:35:21 labeled as B2R07601b1