Dell FCX624-I Laptop User Manual


  Open as PDF
of 1494
 
1292 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying multi-device port authentication information
36
Displaying authenticated MAC address information
To display information about authenticated MAC addresses on the ports where the multi-device
port authentication feature is enabled, enter the following command.
Syntax: show auth-mac-address
The following table describes the information displayed by the show auth-mac-address command.
Displaying multi-device port authentication
configuration information
To display information about the multi-device port authentication configuration, enter the following
command.
Syntax: show auth-mac-address configuration
The following table describes the output from the show auth-mac-address configuration command.
TABLE 226 Output from the show authenticated-mac-address command
This field... Displays...
Port The port number where the multi-device port authentication feature is enabled.
Vlan The VLAN to which the port has been assigned.
Accepted MACs The number of MAC addresses that have been successfully authenticated
Rejected MACs The number of MAC addresses for which authentication has failed.
Attempted-MACs The rate at which authentication attempts are made for MAC addresses.
PowerConnect#show auth-mac-address
----------------------------------------------------------------------
Port Vlan Accepted MACs Rejected MACs Attempted-MACs
----------------------------------------------------------------------
1/18 100 1 100 0
1/20 40 0 0 0
1/22 100 0 0 0
4/5 30 0 0 0
PowerConnect#show auth-mac-address configuration
Feature enabled : Yes
Number of Ports enabled : 4
--------------------------------------------------------------------------
Port Fail-Action Fail-vlan Dyn-vlan MAC-filter
--------------------------------------------------------------------------
1/18 Block Traffic 1 No No
1/20 Block Traffic 1 No No
1/22 Block Traffic 1 No Yes
4/5 Block Traffic 1 No No