Filter
Top Products
PowerConnect B-Series FCX Configuration Guide 1401
53-1002266-01
Syslog messages
41
Informational telnet | SSH | web access [by <username>]
from src IP <source ip address>, src MAC
<source MAC address> rejected, <n>
attempts
There were failed web, SSH, or Telnet login
access attempts from the specified source
IP and MAC address.
• [by <user> <username>] does not
appear if telnet or SSH clients are
specified.
• <n> is the number of times this SNMP
trap occurred in the last five minutes,
or other configured number of
minutes.
Informational Trunk group (<ports>) created by 802.3ad
link-aggregation module.
802.3ad link aggregation is configured on
the device, and the feature has dynamically
created a trunk group (aggregate link).
The <ports> is a list of the ports that were
aggregated to make the trunk group.
Informational user <username> added | deleted |
modified from console | telnet | ssh | web |
snmp
A user created, modified, or deleted a local
user account through the Web, SNMP,
console, SSH, or Telnet session.
Informational vlan <vlan id> added | deleted | modified
from console | telnet | ssh | web | snmp
session
A user created, modified, or deleted a VLAN
through the Web, SNMP, console, SSH, or
Telnet session.
Informational Warm start The system software (flash code) has been
reloaded.
Informational Stack: Stack unit <unit#> has been deleted
to the stack system
The specified unit has been deleted from
the stacking system.
Informational Stack unit <unitNumber> has been elected
as ACTIVE unit of the stack system
The specified unit in a stack has been
elected as the Master unit for the stacking
system.
Informational Stack: Stack unit <unit#> has been added to
the stack system
The specified unit has been added to the
stacking system.
Informational System: Management MAC address changed
to <mac_address>
The management MAC address of a
stacking system has been changed
Informational System: Stack unit <unit#> Fan <fan#>
(<description>), failed
The operational status of a fan in the
specified unit in a stack changed from
normal to failure.
Informational System: Stack unit <unit#> Power supply
<power-supply#> is down
The operational status of a power supply of
the specified unit in a stack changed from
normal to failure.
Informational System: Stack unit <unit#> Power supply
<power-supply#> is up
The operational status of a power supply of
the specified unit in a stack changed from
failure to normal.
Informational System: Stack unit <unit#r> Fan <fan#>
(<description>), ok
The operational status of a fan in the
specified unit in a stack changed from
failure to normal.
Informational System: Stack unit <unitNumber>
Temperature <actual-temp> C degrees,
warning level <warning-temp> C degrees,
shutdown level <shutdown-temp> C degrees
The actual temperature reading for a unit in
a stack is above the warning temperature
threshold.
TABLE 239 Syslog messages (Continued)
Message level Message Explanation