Dell FCX624-I Laptop User Manual


  Open as PDF
of 1494
 
PowerConnect B-Series FCX Configuration Guide 143
53-1002266-01
Managing your IronStack
5
Table 32 describes the output from the show stack neighbors command.
Displaying stack port information
The show stack stack-ports command displays information about stack port status.
Syntax: show stack stack-ports
Table 33 describes the output from the show stack stack-ports command.
Displaying running configuration information
The show running-config command displays information about the current stack configuration.
PowerConnect(config)# show running-config
Current configuration:
!
ver 7.2.0.a
!
stack unit 1
module 1 FCX-24-port-management-module
module 2 FCX-cx4-2-port-16g-module
module 3 FCX-xfp-1-port-16g-module
stack-port 1/2/1 1/3/1
stack unit 2
module 1 FCX-48-port-management-module
module 2 FCX-xfp-2-port-16g-module
stack unit 3
module 1 FCX-48-port-management-module
module 2 FCX-xfp-1-port-16g-module
module 3 FCX-cx4-1-port-16g-module
stack unit 4
module 1 FCX-48-port-management-module
module 2 FCX-cx4-1-port-16g-module
TABLE 32 Field descriptions for the show stack neighbors command
This field Indicates...
ID The stack identification number for this unit.
Stack-port1 Identifies the neighbor stack unit for stack-port1 for this unit id
Stack-port2 Identifies the neighbor stack unit for stack-port2 for this unit id
TABLE 33 Field descriptions for the show stack stack-ports command
This field Indicates...
ID The stack identification number for this unit
Stack-port1 Indicates port state (up or down) and identifies the port by number (stack-ID/slot/port)
Stack-port 2 Indicates port state (up or down) and identifies the port by number (stack-ID/slot/port)
PowerConnect(config)# show stack stack-ports
ID Stack-port1 Stack-port2
1 up (1/2/1) up (1/2/2)
2 up (2/2/1) up (2/2/2)
3 up (3/2/1) up (3/3/1)
4 up (4/2/1) up (4/3/1)
5 up (5/2/1) up (5/3/1)