Dell FCX624-I Laptop User Manual


  Open as PDF
of 1494
 
514 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Converting a VLAN created by GVRP into a statically-configured VLAN
14
Leave – 600 ms
Leaveall – 10000 ms
Converting a VLAN created by GVRP into a statically-configured VLAN
You cannot configure VLAN parameters on VLANs created by GVRP. Moreover, VLANs and VLAN
ports added by GVRP do not appear in the running-config and cannot be saved in the startup-config
file.
To be able to configure and save VLANs or ports added by GVRP, you must convert the VLAN ports
to statically-configured ports.
To convert a VLAN added by GVRP into a statically-configured VLAN, add the ports using commands
such as the following.
PowerConnect(config)#vlan 22
PowerConnect(config-vlan-222)#tagged ethernet 1/1 to 1/8
These commands convert GVRP-created VLAN 22 containing ports 1/1 through 1/8 into
statically-configured VLAN 22.
Syntax: [no] vlan <vlan-id>
Syntax: [no] tagged ethernet <port> [to <port> | ethernet <port>]
Use the same commands to statically add ports that GVRP added to a VLAN.
NOTE
You cannot add the VLAN ports as untagged ports.
NOTE
After you convert the VLAN, the VLAN name changes from “‘GVRP_VLAN_<vlan-id>“ to
“STATIC_VLAN_<vlan-id>“.
ethernet <port> specifies a port. Specify the <port> variable in the following formats:
PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
To specify a list of ports, enter each port as ethernet <port> followed by a space. For example,
ethernet 1/24 ethernet 6/24 ethernet 8/17
To specify a range of ports, enter the first port in the range as ethernet <port> followed by the last
port in the range. For example, ethernet 1/1 to 1/8.
You can combine lists and ranges in the same command. For example: enable ethernet 1/1 to 1/8
ethernet 1/24 ethernet 6/24 ethernet 8/17.
Displaying GVRP information
You can display the following GVRP information:
GVRP configuration information
GVRP VLAN information
GVRP statistics