Filter
Top Products
520 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying GVRP information
14
• PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
This display shows the following information for the port.
To display GVRP statistics for all ports, enter the show gvrp statistics all command.
Displaying CPU utilization statistics
You can display CPU utilization statistics for GVRP.
To display CPU utilization statistics for GVRP for the previous one-second, one-minute, five-minute,
and fifteen-minute intervals, enter the following command at any level of the CLI.
TABLE 86 CLI display of GVRP statistics
This field... Displays...
Leave All Received The number of Leaveall messages received.
Join Empty Received The number of Join Empty messages received.
Join In Received The number of Join In messages received.
Leave Empty Received The number of Leave Empty messages received.
Leave In Received The number of Leave In messages received.
Empty Received The number of Empty messages received.
Leave All Transmitted The number of Leaveall messages sent.
Join Empty Transmitted The number of Join Empty messages sent.
Join In Transmitted The number of Join In messages sent.
Leave Empty Transmitted The number of Leave Empty messages sent.
Leave In Transmitted The number of Leave In messages sent.
Empty Transmitted The number of Empty messages sent.
Invalid Messages/Attributes
Skipped
The number of invalid messages or attributes received or skipped. This can
occur in the following cases:
• The incoming GVRP PDU has an incorrect length.
• "End of PDU" was reached before the complete attribute could be parsed.
• The Attribute Type of the attribute that was being parsed was not the
GVRP VID Attribute Type (0x01).
• The attribute that was being parsed had an invalid attribute length.
• The attribute that was being parsed had an invalid GARP event.
• The attribute that was being parsed had an invalid VLAN ID. The valid
range is 1 – 4095.
Failed Registrations The number of failed registrations that have occurred. A failed registration can
occur for the following reasons:
• Join requests were received on a port that was blocked from learning
dynamic VLANs (GVRP Blocking state).
• An entry for a new GVRP VLAN could not be created in the GVRP database.