Dell FCX624-I Laptop User Manual


  Open as PDF
of 1494
 
622 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Viewing traffic policies
18
or
Syntax: clear statistics traffic-policy <TPD name>
The <TPD name> is the name of the traffic policy definition for which you want to clear traffic policy
counters.
Viewing traffic policies
To view traffic policies that are currently defined on the Dell device, enter the show traffic-policy
command. The following example shows displayed output.Table 110 explains the output of the
show traffic-policy command.
Syntax: show traffic-policy [<TPD name>]
To display all traffic policies, enter the show traffic-policy command without entering a TPD name.
TABLE 110 Traffic policy information
This line... Displays...
Traffic Policy The name of the traffic policy.
Metering Shows whether or not rate limiting was configured as part of the traffic policy:
Enabled – The traffic policy includes a rate limiting configuration.
Disabled – The traffic policy does not include a rate limiting configuration.
Mode If rate limiting is enabled, this field shows the type of metering enabled on the port:
Fixed Rate-Limiting
Adaptive Rate-Limiting
cir The committed information rate, in kbps, for the adaptive rate limiting policy.
cbs The committed burst size, in bytes per second, for the adaptive rate- imiting policy.
pir The peak information rate, in kbps, for the adaptive rate limiting policy.
pbs The peak burst size, in bytes per second, for the adaptive rate limiting policy.
Counting Shows whether or not ACL counting was configured as part of the traffic policy:
Enabled – Traffic policy includes an ACL counting configuration.
Disabled – Traffic policy does not include an ACL traffic counting configuration.
Number of
References/Bindings
The number of port regions to which this traffic policy applies. For example, if the traffic
policy is applied to a trunk group that includes ports e 9/9, 9/10, 9/11, and 9/12, the
value in this field would be 2, because these four trunk ports are in two different port
regions.
PowerConnect#show traffic-policy t_voip
Traffic Policy - t_voip:
Metering Enabled, Parameters:
Mode: Adaptive Rate-Limiting
cir: 100 kbps, cbs: 2000 bytes, pir: 200 kbps, pbs: 4000
bytes
Counting Not Enabled
Number of References/Bindings:1