Filter
Top Products
PowerConnect B-Series FCX Configuration Guide 711
53-1002266-01
Configuring LLDP-MED
24
• Latitude is 41.87884 degrees north (or 41.87884 degrees).
• Longitude is 87.63602 degrees west (or 87.63602 degrees).
• The latitude and longitude resolution of 18 describes a geo-location area that is latitude
41.8769531 to latitude 41.8789062 and extends from -87.6367188 to -87.6347657 degrees
longitude. This is an area of approximately 373412 square feet (713.3 ft. x 523.5 ft.).
• The location is inside a structure, on the 103rd floor.
• The WGS 84 map was used as the basis for calculating the location.
Example coordinate-based location advertisement
The coordinate-based location advertisement will appear similar to the following on the remote
device, and in the CLI display output on the Dell PowerConnect device (show lldp local-info).
Civic address location
When you configure a media Endpoint location using the address-based location, you specify the
location the entry refers to, the country code, and the elements that describe the civic or postal
address.
To configure a civic address-based location for LLDP-MED, enter commands such as the following
at the Global CONFIG level of the CLI.
PowerConnect(config)#lldp med location-id civic-address refers-to client country
US elem 1 CA elem 3 “Santa Clara” elem 6 “4980 Great America Pkwy” elem 24 95054
elem 27 5 elem 28 551 elem 29 office elem 23 “John Doe”
Syntax: [no] lldp med location-id civic-address refers-to <elem> country <country code> elem <CA
type> <value> [elem <CA type> <value>] [elem <CA type> <value>]....
refers-to <elem> describes the location that the entry refers to. Specify one of the following:
• client
• dhcp-server
• network-element
where dhcp-server or network-element should only be used if it is known that the Endpoint is in
close physical proximity to the DHCP server or network element.
<country code> is the two-letter ISO 3166 country code in capital ASCII letters.
Example
• CA – Canada
• DE – Germany
• JP – Japan
+ MED Location ID
Data Format: Coordinate-based
Latitude Resolution : 20 bits
Latitude Value : -78.303 degrees
Longitude Resolution : 18 bits
Longitude Value : 34.27 degrees
Altitude Resolution : 16 bits
Altitude Value : 50. meters
Datum : WGS 84