Dell FCX624-I Laptop User Manual


  Open as PDF
of 1494
 
884 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying IP configuration information and statistics
26
Global IP settings – refer to “Displaying global IP configuration information” on page 884.
ARP entries – refer to “Displaying ARP entries” on page 884.
IP traffic statistics – refer to “Displaying IP traffic statistics” on page 885.
Displaying global IP configuration information
To display the Layer 2 Switch IP address and default gateway, enter the following command.
Syntax: show ip
This display shows the following information.
Displaying ARP entries
To display the entries the Layer 2 Switch has placed in its ARP cache, enter the following command
from any level of the CLI.
TABLE 166 CLI display of global IP configuration information – Layer 2 Switch
This field... Displays...
IP configuration
Switch IP address The management IP address configured on the Layer 2 Switch. Specify this
address for Telnet or Web management access.
Subnet mask The subnet mask for the management IP address.
Default router address The address of the default gateway, if you specified one.
Most recent TFTP access
TFTP server address The IP address of the most-recently contacted TFTP server, if the switch has
contacted a TFTP server since the last time the software was reloaded or the
switch was rebooted.
Configuration filename The name under which the Layer 2 Switch startup-config file was uploaded or
downloaded during the most recent TFTP access.
Image filename The name of the Layer 2 Switch flash image (system software file) that was
uploaded or downloaded during the most recent TFTP access.
PowerConnect# show ip
Switch IP address: 192.168.1.2
Subnet mask: 255.255.255.0
Default router address: 192.168.1.1
TFTP server address: None
Configuration filename: None
Image filename: None
PowerConnect# show arp
Total Arp Entries : 1, maximum capacity: 1000
No.
1 IP Mac Port Age VlanId
192.168.1.170 0010.5a11.d042 7 0 1