Dell FCX624-S Laptop User Manual


  Open as PDF
of 1494
 
974 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying OSPF information
29
Displaying the routes that have been redistributed into OSPF
You can display the routes that have been redistributed into OSPF. To display the redistributed
routes, enter the following command at any level of the CLI.
In this example, four routes have been redistributed. Three of the routes were redistributed from
static IP routes and one route was redistributed from a directly connected IP route.
Syntax: show ip ospf redistribute route [<ip-addr> <ip-mask>]
The <ip-addr> <ip-mask> parameter specifies a network prefix and network mask. Here is an
example.
Path_Type The type of path, which can be one of the following:
Inter – The path to the destination passes into another area.
Intra – The path to the destination is entirely within the local area.
External1 – The path to the destination is a type 1 external route.
External2 – The path to the destination is a type 2 external route.
Adv_Router The OSPF router that advertised the route to this Layer 3 Switch.
Link-State The link state from which the route was calculated.
Dest_Type The destination type, which can be one of the following:
ABR – Area Border Router
ASBR – Autonomous System Boundary Router
Network – the network
State The route state, which can be one of the following:
Changed
Invalid
Valid
This information is used by Dell technical support.
Tag The external route tag.
Flags State information for the route entry. This information is used by Dell technical support.
Paths The number of paths to the destination.
Out_Port The router port through which the Layer 3 Switch reaches the next hop for this route path.
Next_Hop The IP address of the next-hop router for this path.
Type The route type, which can be one of the following:
OSPF
Static Replaced by OSPF
Arp_Index The index position in the ARP table of the ARP entry for this path's IP address.
State State information for the path. This information is used by Dell technical support.
TABLE 178 CLI Display of OSPF route information (Continued)
Field Definition
PowerConnect#show ip ospf redistribute route
4.3.0.0 255.255.0.0 static
3.1.0.0 255.255.0.0 static
10.11.61.0 255.255.255.0 connected
4.1.0.0 255.255.0.0 static