Filter
Top Products
1270 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying port security information
35
Displaying port security statistics
You can display port security statistics for an interface or for a module.
For example, to display port security statistics for interface 7/11, enter the following command.
Syntax: show port security statistics <port>
Specify the <port> variable in the following formats:
• PowerConnect B-Series FCX stackable switches – <stack-unit/slotnum/portnum>
For example, to display port security statistics for interface module 7, enter the following command.
PowerConnect#show port security statistics 7
Module 7:
Total ports: 0
Total MAC address(es): 0
Total violations: 0
Total shutdown ports 0
Syntax: show port security statistics <module>
Table 223 describes the output from the show port security statistics <module> command.
Secure-Src-Addr The secure MAC address.
Resource Whether the address was secured using a local or global resource.Refer to
“Local and global resources” on page 1264 for more information.
Age-Left The number of minutes the MAC address will remain secure.
Shutdown/Time-Left Whether the interface has been shut down due to a security violation and the
number of seconds before it is enabled again.
TABLE 222 Output from the show port security statistics <port> command
This field... Displays...
Port The slot and port number of the interface.
Total-Addrs The total number of secure MAC addresses on the interface.
Maximum-Addrs The maximum number of secure MAC addresses on the interface.
Violation The number of security violations on the port.
Shutdown/Time-Left Whether the port has been shut down due to a security violation and the
number of seconds before it is enabled again.
TABLE 221 Output from the show port security mac command (Continued)
This field... Displays...
PowerConnect#show port security statistics e 7/11
Port Total-Addrs Maximum-Addrs Violation Shutdown/Time-Left
----- ----------- ------------- --------- ------------------
7/11 1 1 0 no