Dell FCX624-S Laptop User Manual


  Open as PDF
of 1494
 
PowerConnect B-Series FCX Configuration Guide 1291
53-1002266-01
Displaying multi-device port authentication information
36
Multi-device port authentication password override
The multi-device port authentication feature communicates with the RADIUS server to authenticate
a newly found MAC address. The RADIUS server is configured with the usernames and passwords
of authenticated users. For multi-device port authentication, the username and password is the
MAC address itself; that is, the device uses the MAC address for both the username and the
password in the request sent to the RADIUS server. For example, given a MAC address of
0007e90feaa1, the users file on the RADIUS server would be configured with a username and
password both set to 0007e90feaa1. When traffic from this MAC address is encountered on a
MAC-authentication-enabled interface, the device sends the RADIUS server an Access-Request
message with 0007e90feaa1 as both the username and password.
The MAC address is the default password for multi-device port authentication, and you can
optionally configure the device to use a different password. Note that the MAC address is still the
username and cannot be changed.
To change the password for multi-device port authentication, enter a command such as the
following at the GLOBAL Config Level of the CLI.
PowerConnect(config)#mac-authentication password-override
Syntax: [no] mac-authentication password-override <password>
where <password> can have up to 32 alphanumeric characters, but cannot include blank spaces.
Limiting the number of authenticated MAC addresses
You cannot enable MAC port security on the same port that has multi-device port authentication
enabled. To simulate the function of MAC port security, you can enter a command such as the
following.
PowerConnect(config-if-e1000-2)#mac-authentication max-accepted-session 5
Syntax: [no] mac-authentication max-accepted-session <session-number>
This command limits the number of successfully authenticated MAC addresses. Enter a value from
1 - 250 for session-number
Displaying multi-device port authentication information
You can display the following information about the multi-device port authentication configuration:
Information about authenticated MAC addresses
Information about the multi-device port authentication configuration
Authentication Information for a specific MAC address or port
Multi-device port authentication settings and authenticated MAC addresses for each port
where the multi-device port authentication feature is enabled
The MAC addresses that have been successfully authenticated
The MAC addresses for which authentication was not successful