Dell FCX624-S Laptop User Manual


  Open as PDF
of 1494
 
PowerConnect B-Series FCX Configuration Guide 1331
53-1002266-01
Configuring web authentication options
37
FIGURE 173 Objects in the web authentication pages that can be customized
Customizing the title bar
You can customize the title bar that appears on all Web Authentication pages (refer to Figure 173).
To do so, enter a command such as the following.
PowerConnect(config-vlan-10-webauth)#webpage custom-text title "Dell Secure
Access Page"
Syntax: [no] webpage custom-text title "<title>"
For <title>, enter up to 128 alphanumeric characters. The default title bar is "Web Authentication".
To reset the title bar back to the default value, enter the command no webpage custom-text title.
Customizing the banner image (Logo)
You can customize the logo that appears on all Web Authentication pages. Figure 173 shows
placement of the banner image in the Login page.
NOTE
The banner image does not display in the Maximum Attempts Limit page (Figure 171).
To customize the banner image, use the TFTP protocol to upload an image file from a TFTP server to
the PowerConnect switch. The image file can be in the format jpg, bmp, or gif, and its size must be
64K or less. When you upload a new image file, it willl overwrite the existing image file.
To replace the existing logo with a new one, enter a command such as the following.
PowerConnect(config-vlan-10-webauth)#webpage logo copy tftp 10.10.5.1
brocadelogo.gif
Syntax: [no] webpage logo copy tftp <ip-address> <filename>
Text
box
Header
Footer
Login button
Logo
Title bar