Filter
Top Products
PowerConnect B-Series FCX Configuration Guide 1333
53-1002266-01
Displaying web authentication information
37
The <filename> parameter is the name of the text file on the TFTP server.
To revert back to the default text box (none), enter the command no webpage terms.
Customizing the login button
You can customize the Login button that appears on the bottom of the Web Authentication Login
page (refer to Figure 173). To do so, enter a command such as the following.
PowerConnect(config-vlan-10-webauth)#webpage custom-text login-button "Press to
Log In"
Syntax: [no] webpage custom-text login-button "<text>"
For <text>, enter up to 32 alphanumeric characters.
To reset the Login button back to the default value ("Login"), enter the command no webpage
custom-text login-button.
Customizing the footer
You can customize the footer that appears on all Web Authentication pages. Figure 173 shows
placement of the footer in the Login page.
To customize the footer enter a command such as the following.
PowerConnect(config-vlan-10-webauth)#webpage custom-text bottom "Network One
Copyright 2010"
Syntax: [no] webpage custom-text bottom "<text>"
For <text>, enter up to 255 alphanumeric characters.
To reset the footer back to the default text, enter the command no webpage custom-text bottom.
The default text is "This network is restricted to authorized users only. Violators may be subjected to
legal prosecution. Activity on this network is monitored and may be used as evidence in a court of
law.
Displaying web authentication information
The following sections present the show commands you can use to display information about the
Web Authentication feature.
Displaying the web authentication configuration
Enter the following command to display the configuration for the Web Authentication feature.
PowerConnect#show webauth
=============================================================================
WEB AUTHENTICATION (VLAN 25): Enable
attempt-max-num: 5 (Default)
host-max-num: 0 (Default)
block duration: 90 (Default)
cycle-time: 600 (Default)
port-down-authenticated-mac-cleanup: Enable (Default)
reauth-time: 28800 (Default)
authenticated-mac-age-time: 3600 (Default)
dns-filter: Disable (Default)