Dell FCX624-S Laptop User Manual


  Open as PDF
of 1494
 
144 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Managing your IronStack
5
module 3 FCX-xfp-1-port-16g-module
priority 128
stack enable
!
Syntax: show running-config
Table 34 describes the output from the show running-config command.
Displaying configured stacking ports
The stacking ports may display in the output from the show running-config command in three
different ways.
1. When stacking is enabled, the output shows both stacking ports.
stack unit 1
module 1 FCX-24-port-management-module
module 2 FCX-cx4-2-port-16g-module
module 3 FCX-xfp-1-port-16g-module
stack-port 1/2/1 1/3/1
2. When stacking is not enabled, neither stacking port is displayed.
stack unit 1
module 1 FCX-24-port-management-module
module 2 FCX-cx4-2-port-16g-module
module 3 FCX-xfp-1-port-16g-module
3. If one stacking port is configured, that port will be displayed regardless of whether or not
stacking is enabled.
stack unit 1
module 1 FCX-24-port-management-module
module 2 FCX-cx4-2-port-16g-module
module 3 FCX-xfp-1-port-16g-module
stack-port 1/3/1
Displaying software version information
The show version command shows the software version that the stack is running. Note that the last
line of this output shows the bootup ID and role for this unit. Output resembles the following.
PowerConnect(config)# show version
SW: Version 07.2.00aT7e1 Copyright (c) 2009 Brocade Communications Systems, Inc.
Compiled on Jul 23 2008 at 02:38:03 labeled as FCX05002
(3054675 bytes) from Primary FCX05002.bin
STACKID 1: compiled on Jul 23 2008 at 02:38:03 labeled as FCX05000
(3054675 bytes) from Primary FCX05000.bin
STACKID 2: compiled on Jul 23 2008 at 02:38:03 labeled as FCX05000
(3054675 bytes) from Primary FCX05000.bin
STACKID 3: compiled on Jul 23 2008 at 02:38:03 labeled as FCX05000
TABLE 34 Field descriptions for the show running-config command
This field Indicates...
Stack unit <#> The stack identification number for this unit.
Module <#> Identifies the configuration for modules on this unit.
Pri Indicates that a priority has been assigned to this stack unit