Dell FCX624-S Laptop User Manual


  Open as PDF
of 1494
 
PowerConnect B-Series FCX Configuration Guide 507
53-1002266-01
Application examples
14
In this configuration, the edge devices are statically (manually) configured with VLAN information.
The core device dynamically configures itself to be a member of each of the edge device VLANs.
The operation of GVRP on the core device results in the following VLAN configuration on the device:
VLAN 20
1/24 (tagged)
6/24 (tagged)
VLAN 30
6/24 (tagged)
8/17 (tagged)
VLAN 40
1/24 (tagged)
8/17 (tagged)
VLAN 20 traffic can now travel through the core between edge devices A and B. Likewise, VLAN 30
traffic can travel between B and C and VLAN 40 traffic can travel between A and C. If an edge
device is moved to a different core port or the VLAN configuration of an edge device is changed, the
core device automatically reconfigures itself to accommodate the change.
Notice that each of the ports in the dynamically created VLANs is tagged. All GVRP VLAN ports
configured by GVRP are tagged, to ensure that the port can be configured for additional VLANs.
NOTE
This example assumes that the core device has no static VLANs configured. However, you can have
static VLANs on a device that is running GVRP. GVRP can dynamically add other ports to the statically
configured VLANs but cannot delete statically configured ports from the VLANs.
Dynamic core and dynamic edge
GVRP is enabled on the core device and on the edge devices. This type of configuration is useful if
the devices in the edge clouds are running GVRP and advertise their VLANs to the edge devices.
The edge devices learn the VLANs and also advertise them to the core. In this configuration, you do
not need to statically configure the VLANs on the edge or core devices, although you can have
statically configured VLANs on the devices. The devices learn the VLANs from the devices in the
edge clouds.
Core device Edge device A Edge device B Edge device C
GVRP is enabled on all
ports.
Both learning and
advertising are
enabled.
NOTE: Since learning is
disabled on all the
edge devices,
advertising on the
core device has no
effect in this
configuration.
GVRP is enabled on
port 4/24. Learning
is disabled.
VLAN 20
Port 2/1 (untagged)
Port 4/24 (tagged)
VLAN 40
Port 4/1 (untagged)
Port 4/24 (tagged)
GVRP is enabled on
port 4/1. Learning is
disabled.
VLAN 20
Port 2/24 (untagged)
Port 4/1 (tagged)
VLAN 30
Port 4/24 (untagged)
Port 4/1 (tagged)
GVRP is enabled on
port 4/1. Learning
is disabled.
VLAN 30
Port 2/24
(untagged)
Port 4/1 (tagged)
VLAN 40
Port 4/24
(untagged)
Port 4/1 (tagged)