Filter
Top Products
538 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying Information about MAC-based VLANs
15
Displaying allowed MAC addresses
Enter the following command to display information about successfully authenticated MAC
addresses.
PowerConnect#show table-mac-vlan allowed-mac
-------------------------------------------------------------------------------
MAC Address Port Vlan Authenticated Time Age dot1x
-------------------------------------------------------------------------------
0030.4874.3181 2/1/17 76 Yes 00d01h17m22s Ena Dis
Syntax: show table-mac-vlan allowed-mac
The following table describes the information in this output.
Displaying denied MAC addresses
Enter the following command to display information about denied (authentication failed) MAC
addresses.
This field... Displays...
MAC Address The MAC address for which this information is displayed.
Port The port where MAC-based VLAN is enabled.
Vlan The VLAN to which the MAC address has been assigned.
Authenticated Yes indicates authentication is successful.
No indicates authentication has failed.
Inp indicates authentication in progress
Rst indicates a restricted VLAN
Time The time at which the MAC address was authenticated. If the clock is set on the Dell
PowerConnect device, then the actual date and time are displayed. If the clock has not been
set, then the time is displayed relative to when the device was last restarted.
Age The age of the MAC address entry in the authenticated MAC address list.
Dot1x Indicates if 802.1X authentication is enabled or disabled for the MAC address.
This field... Displays...
MAC Address The allowed MAC addresses for which the information is displayed.
Port The port where MAC-based VLAN is enabled.
Vlan The VLAN to which the MAC address has been assigned.
Authenticated Yes indicates authentication has been successful.
Inp indicates authentication is in progress.
Time The time at which each MAC address was authenticated. If the clock is set on the Dell
PowerConnect device, then the actual date and time are displayed. If the clock has not been set,
then the time is displayed relative to when the device was last restarted.
Age The age of the MAC address entry in the authenticated MAC address list.
Dot1x Indicates whether 802.1X authentication is enabled or disabled for each MAC address.