Filter
Top Products
760 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
PIM Sparse
25
RPT Indicates whether the cache entry uses the RP path or the SPT path. The RPT flag can have
one of the following values:
• 0 – The SPT path is used instead of the RP path.
• 1– The RP path is used instead of the SPT path.
NOTE: The values of the RP and SPT flags are always opposite (one is set to 0 and the
other is set to 1).
SPT Indicates whether the cache entry uses the RP path or the SPT path. The SP flag can have
one of the following values:
• 0 – The RP path is used instead of the SPT path.
• 1– The SPT path is used instead of the RP path.
NOTE: The values of the RP and SPT flags are always opposite (one is set to 0 and the
other is set to 1).
Register Suppress Indicates whether the Register Suppress timer is running. This field can have one of the
following values:
• 0 – The timer is not running.
• 1 – The timer is running.
member ports Indicates the Layer 3 Switch physical ports to which the receivers for the source and group
are attached. The receivers can be directly attached or indirectly attached through other
PIM Sparse routers.
virtual ports Indicates the virtual interfaces to which the receivers for the source and group are
attached. The receivers can be directly attached or indirectly attached through other PIM
Sparse routers.
prune ports Indicates the physical ports on which the Layer 3 Switch has received a prune notification
(in a Join/Prune message) to remove the receiver from the list of recipients for the group.
virtual prune ports Indicates the virtual interfaces ports on which the Layer 3 Switch has received a prune
notification (in a Join/Prune message) to remove the receiver from the list of recipients for
the group.
TABLE 137 Output of show ip pim mcache (Continued)
This field... Displays...