Dell FCX624-S Laptop User Manual


  Open as PDF
of 1494
 
852 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Configuring IP parameters – Layer 3 Switches
26
netbios-name-server: 192.168.1.101
network: 192.168.1.0 255.255.255.0
next-bootstrap-server: 192.168.1.102
tftp-server: 192.168.1.103
Syntax: show ip dhcp-server address-pool[s] [<name>]
address-pool[s] - If you enter address-pools, the display will show all address pools
<name> - Displays information about a specific address pool
The following table describes this output.
Display lease-binding information in flash memory
The show ip dhcp-server flash command displays the lease-binding database that is stored in flash
memory.
PowerConnect# show ip dhcp-server flash
The following information is displayed.
PowerConnect# show ip dhcp-server flash
Address Pool Binding:
IP Address Client-ID/ Lease expiration Type
Hardware address
192.168.1.2 001b.ed5d.a440 0d:0h:18m:59s Automatic
192.168.1.3 0012.f2e1.26c0 0d:0h:19m:8s Automatic
Syntax: show ip dhcp-server flash
The following table describes this output.
TABLE 155 CLI display of show ip dhcp-server address pools command
This field... Displays...
Pool name The name of the address pool
Time elapsed since last save The time that has elapsed since the last save.
Total number of active leases The number of leases that are currently active.
Address pool state The state of the address pool (active or inactive).
IP Address exclusions IP addresses that are not included in the address pool
Pool configured options
bootfile The name of the bootfile
dhcp-server-router The address of the DHCP server router
dns-server The address of the dns server
domain-name The name of the domain
lease The identifier for the lease
netbios-name server The address of the netbios name server
network The address of the network
next-bootstrap-server The address of the next-bootstrap server
tftp-server The address of the TFTP server