Dell FE2000 Laptop User Manual


 
1-6 Platform Guide
www.dell.com | support.dell.com
1650 Standard riser board:
PCI bus 2: PCI slot 1 is 64-bit,
66 MHz
PCI bus 2: PCI slot 2 is 64-bit,
66 MHz
Optional riser board:
PCI bus 0: PCI slot 1 is 32-bit,
33 MHz
PCI bus 2: PCI slot 2 is 64-bit,
66 MHz
Install HBA in any PCI
slot.
Install new or existing
DRAC III in PCI slot 1
on the optional riser
board.
Install in any
available PCI slot.
2500 PCI bus 1: PCI slots 6 and 7 are
32-bit, 33 MHz
PCI bus 2: PCI slots 3, 4 and 5
are 64-bit, 33 MHz
PCI bus 3: PCI slots 1 and 2 are
64-bit, 66 MHz
For dual HBA
configurations, install the
HBAs on separate 64-bit
PCI buses to balance the
load on the system.
Install new or existing
DRAC II in PCI slot 7.
Install in any
available PCI slot.
2550 PCI bus 0: PCI slots 1 through 3
are 64-bit, 33-MHz
Install HBAs in any PCI
slot.
N/A N/A
2600 PCI bus 0: PCI slot 1 is 64-bit,
33 MHz
PCI bus 2: PCI slot 7 is 64-bit,
33–133 MHz
PCI bus 3: PCI slot 6 is 64-bit,
33–133 MHz
PCI bus 4: PCI slots 4 and 5 are
64-bit, 33–100 MHz
PCI bus 5: PCI slots 2 and 3 are
64-bit, 33–100 MHz
NOTE: If you are installing
expansion cards of different
operating speeds, install the
fastest card in slot 7 and the
slowest card in slot 1.
For dual HBA
configurations, install the
HBAs on separate PCI
buses to balance the load
on the system.
N/A An integrated
RAID controller is
available on the
system board.
NOTE: To activate
the integrated
RAID controller,
you must install a
RAID battery and
key.
Table 1-4. PCI Slot Assignments for PowerEdge Cluster Nodes (continued)
PowerEdge
System
PCI Buses HBA DRAC II or III RAID Controller