Dell FE2000 Laptop User Manual


 
Platform Guide 1-7
2650 PCI/PCI-X bus 1: PCI slot 1 is
64-bit, 33–100 MHz
PCI/PCI-X bus 1: PCI slot 2 is
64-bit, 33–133 MHz
PCI/PCI-X bus 2: PCI slot 3 is
64-bit, 33–133 MHz
NOTE: PCI/PCI-X slot 1 must
be empty for PCI/PCI-X slot 2 to
attain an operating speed of
133 MHz.
For dual HBA
configurations, install the
HBAs on separate PCI
buses to balance the load
on the system.
N/A An integrated
RAID controller is
available on the
system board.
NOTE: To activate
the integrated
RAID controller,
you must install a
RAID battery and
key.
4400 PCI bus 0: PCI slots 1 and 2 are
64-bit, 33/66-MHz
PCI bus 1: PCI slots 3 through 6
are 64-bit, 33-MHz
PCI bus 2: PCI slot 7 is 32-bit,
33-MHz
For dual HBA
configurations, install the
HBAs on separate PCI
buses (PCI buses 1
and 2) to balance the
load on the system.
Install new or existing
DRAC II in PCI slot 7.
N/A
4600 PCI bus 0: PCI slot 1 is 32-bit,
33 MHz
PCI/PCI-X bus 1: PCI slots 2
and 3 are 64-bit, 66–100 MHz
PCI/PCI-X bus 2: PCI slots 4
and 5 are 64-bit, 66–100 MHz
PCI/PCI-X bus 3: PCI slots 6
and 7 are 64-bit, 66–100 MHz
For dual HBA
configurations, install the
HBAs on separate PCI
buses to balance the load
on the system.
Install new or existing
DRAC III in PCI slot 1.
An integrated
RAID controller is
available on the
system board.
NOTE: To activate
the integrated
RAID controller,
you must install a
RAID battery and
key.
6400
6450
PCI bus 0: PCI slot 1 is 32-bit,
33-MHz
PCI bus 1: PCI slots 2 through 5
are 64-bit, 33-MHz
PCI bus 2: PCI slots 6 and 7 are
64-bit, 33/66-MHz
For dual HBA
configurations, install the
HBAs on separate PCI
buses (PCI buses 1
and 2) to balance the
load on the system.
Install new or existing
DRAC II in PCI slot 3.
N/A
Table 1-4. PCI Slot Assignments for PowerEdge Cluster Nodes (continued)
PowerEdge
System
PCI Buses HBA DRAC II or III RAID Controller