Filter
Top Products
Platform Guide 1-15
If you have not configured your cluster, apply the QFE (or Service Pack 1 when available) to
all of the cluster nodes.
If you have configured your cluster, perform one of the following procedures and then
reboot each cluster node, one at a time:
• Manually change the registry TimeOutValue setting to 60 on each cluster node.
• Download the Cluster Disk Timeout Fix utility from the Dell Support website at
support.dell.com and run the utility on your cluster.
When prompted, type the name of your cluster in the Cluster name field and type
Dell | EMC in the Storage System Type field. The utility locates the cluster nodes
associated with the cluster name and sets the TimeOutValue setting on each node to the
correct setting.