Filter
Top Products
14 Platform Guide
www.dell.com | support.dell.com
Obtaining More Information
See the
Dell PowerEdge Cluster FE400 Installation and Troubleshooting Guide
for more information
about SAN-attached clusters. You can also see the Dell Support website at
support.dell.com
.
Best Practices
This section provides best practices for troubleshooting issues that may occur in your cluster.
•
Incorrect TimeOutValue setting in the Registry.
When you run the Cluster Configuration wizard on a cluster solution running Windows
Server 2003, the wizard modifies the following registry value:
Windows 2000 Advanced
Server service pack
Windows 2000 Advanced Server configurations require Service Pack 4
or later.
Windows Server 2003,
Enterprise Edition
service pack
Windows Server 2003 configurations require KB818877 and the latest
StorPort hotfix (KB838894 at the time of print); or Service Pack 1 if
available.
Dell | EMC CX600
core software
2.07.600 (with Access Logix Option 01.02.5 or later installed and
Access Control enabled) or later.
Dell | EMC CX400
core software
2.07.400 (with Access Logix Option 01.02.5 or later installed and
Access Control enabled) or later.
Dell | EMC CX200
core software
2.07.200 (with Access Logix Option 01.02.5 or later installed and
Access Control enabled) or later.
Additional software
application programs
EMC Navisphere Agent 6.7 or later.
EMC Navisphere Manager 6.7 or later.
EMC PowerPath 3.0.6 or later.
EMC MirrorView Option version 01.01.5 or later (not supported on
the Dell | EMC CX200).
EMC MirrorView/Asynchronous Option version 01.01.5 or later
(not supported on the Dell | EMC CX200).
EMC AdmSnap version 2.4.0 or later.
EMC SnapView Option version 01.01.5 or later.
Emulex Configuration Utility for Windows 2000 version 1.41a13 or
later.
LPUtilNT for Windows Server 2003 version 1.7a12 or later.
QLogic SANsurfer SANblade Manager for Windows 2000 version 2.0.29
or later.
Table 1-6. SAN-Attached Clusters Rules and Guidelines (continued)
Rule/Guideline Description