Filter
Top Products
Error Code Message Information
Action Check chassis fabric type in CMC GUI and compare to the type of
IOM or mezzanine card.
HWC5004
Message A link tuning failure detected on <
name
>.
Details CMC has old firmware. After updating the firmware the CMC will
recognize the device.
Action Update the CMC firmware. If the issue persists, see Getting Help.
HWC5006
Message A failure is detected on <
name
>.
Action If the issue persists, see Getting Help.
HWC5008
Message Console is not available for the <
name
>.
Action If the issue persists, see Getting Help.
HWC5010
Message <
name
> cannot detect any hosts.
Action If the issue persists, see Getting Help.
HWC5014
Message <
name
> is not functional and is powered off.
Action If the issue persists, see Getting Help.
HWC5031
Message IO module <
number
> is offline.
Details The CMC has powered off the IOM.
Action If the issue persists, see Getting Help.
HWC5032
Message A fabric mismatch detected on IO module <
number
>.
Details The fabric type for IOM's on the same chassis fabric must match.
Action Check chassis fabric type in CMC GUI and compare to the type of
both IOM's.
HWC5034
Message A link tuning failure detected on IO module <
number
>.
Details Link tuning table not supported for this IO modular.
Action Update the CMC firmware. If the issue persists, see Getting Help.
HWC5036
Message A failure is detected on IO module <
number
>.
89