Filter
Top Products
Removing and Replacing Parts 4-49
LVDS Board
The LVDS board is present on computers with a 13.3-inch LCD. If you have a
12.1-inch LCD, skip this subsection.
Figure 4-32. LVDS Board Removal
To remove the LVDS board, follow these steps:
1. Remove LVDS board screw G2.
This is the other screw that you left in place when you removed the
13.3-inch LCD cable harness from connector JP1 on the LVDS board.
2. Remove the LVDS board from the main board.
The LVDS board is held in place on the main board by connectors JP8 and
JP12.
3. Remove the LVDS board from the computer.
LVDS board
main board
G2
(screw G2
is 3 mm)
3 mm
connector JP8
connector JP12
connector JP1