Filter
Top Products
Removing and Replacing Parts 4-53
Audio Board
Figure 4-36. Audio Board Removal
To remove the audio board, follow these steps:
1. Remove the main board.
2. Remove the audio board from the bottom of the main board.
The audio board is held in place by two connectors on the main board (JP26
and JP22) and two connectors on the audio board (JP1 and JP2). The con-
nectors are different sized to ensure correct placement when reinstalling the
audio board.
Ensure that you reinstall the audio board when you reinstall the main board.
Make sure there are two rubber bumpers installed on the side of the audio board
next to the back cover.
audio board
main board
connector JP1
connector JP2