Filter
Top Products
Removing and Replacing Parts 4-59
12.1-Inch LCD Panel
.
Figure 4-41. 12.1-Inch LCD Panel Removal
To remove the 12.1-inch LCD
p
anel, follow these ste
p
s:
1. Remove the front bezel.
See the
p
revious subsection, “12.1-Inch LCD Front Bezel.”
2. Remove LCD
p
anel screws LC1, LC2, LC3, and LC4.
3. Remove the LCD Panel.
NOTE: Be careful when removing any part of the LCD flex cable.
Lift u
p
the LCD
p
anel, and disconnect the LCD-to-inverter cable from con-
nector CN1 at the to
p
of the inverter board. Disconnect the LCD flex cable
from the flex-cable connector, J1, in the middle left side on the back of the
p
anel.
LCD panel
LC1
(screws LC1–LC4
are 5 mm)
LCD flex cable
inverter board
LC2
LC3
LC4
5 mm
flex-cable
connector
LCD-to-
inverter
cable
connector
CN1
back cover